Archived Papers for Journal
Tribology in Industry >>
Vol.41, No.2
Publisher: Faculty of Engineering, University of Kragujevac, Serbia
Publishing Date: 2019-06-15
- Effect of TiN Nanoparticles on the Friction and Wear Properties of Spark Plasma Sintered Fe-Cr-NiAuthors: Mphahlele S.R. Oke O.O. Ige O.E. Falodun P.A. Olubambi
- Wear Resistance Increase of Samples Tribomating in Oil Composite with Geo Modifier КGМF-1Authors: V. Aulin S. Lysenko O. Lyashuk A. Hrinkiv D. Velykodnyi Y. Vovk D. Holub A. Chernai
- Friction Forces at the Wheel's Contact with the Ground in a Turning VehicleAuthors: I. Troyanovskaya A. Ulanov A. Zhakov S. Voinash
- Investigation on Tool Wear and Surface Characteristics in Hard turning under Air-Water Jet Spray Impingement Cooling EnvironmentAuthors: R. Kumar A.K. Sahoo P.C. Mishra R.K. Das
- Physico-mechanical and Tribological Properties of Fe–Cu–Ni–Sn and Fe–Cu–Ni–Sn–VN Nanocomposites Obtained by Powder Metallurgy MethodsAuthors: V.A. Mechnik N.A. Bondarenko V.M. Kolodnitskyi V.I. Zakiev I.M. Zakiev M. Storchak S.N. Dub N.O. Kuzin
- Frictional Study of Al 6061 Red-Mud Composite under the Influence of Different Process ParametersAuthors: N. Panwar S. Saini A. Chauhan
- The Application of Chitosan as a Modifier for Lubricating Greases Based on Vegetable OilAuthors: R. Kozdrach J. Skowronski
- Experimental Study on an Influence of Bearing Geometry and TiO2 Nanoparticle Additives on the Performance Characteristics of Fluid Film Lubricated Journal BearingAuthors: S.R. Suryawanshi J.T. Pattiwar
- Quality of Dynamics of Gas-static Thrust Bearing with Movable Carrying Circle on Elastic SuspensionAuthors: V. Kodnyanko A. Kurzakov
- Maximum von Mises Stress in the Sliding Contact of Coated BodiesAuthors: S. Spinu
- A Short Review on Frictional Contact Stress Distribution in Involute GearsAuthors: S.S. Patil S. Karuppanan I. Atanasovska
- Experimental Investigation of Viscosity of Glycerol Based Nanofluids Containing Carbon NanotubesAuthors: G. Bognár A. Vencl
- Friction and Wear of Cr-O-N Coatings Characterized by Atomic Force MicroscopyAuthors: T. Kuznetsova V. Lapitskaya S. Chizhik A.S. Kuprin G.N. Tolmachova V.D. Ovcharenko A. Gilewicz O. Lupicka B.Warcholinski
- Influence of Coating Chemical Composition and Thickness Layer on the Wear Behavior of Cutting Tools a Business Analytics ApproachAuthors: F. Trigos D. Maldonado-Cortés L. Peña-Parás G.E. García
- The Automated Spectrometric Oil Analysis Decision Taking Procedure as a Tool to Prevent Aircraft Engine FailuresAuthors: P.S. Dellis