Archived Papers for Journal
Tribology in Industry >>
Vol.41, No.3
Publisher: Faculty of Engineering, University of Kragujevac, Serbia
Publishing Date: 2019-09-15
- Fundamental Study on No-lubricating Friction Characteristics Due to Anisotropy of Surface Properties Applied to Differential GearAuthors: Y. Ebisuno Y. Sato M. Fukumoto
- Investigation of Abrasive Wear Performances of Different Polyamides by Response Surface MethodologyAuthors: Y. Şahin A. Deniz F. Şahin
- Influence of the Number of Bilayers on the Mechanical and Tribological Properties in [TiN/TiCrN]n Multilayer Coatings Deposited by Magnetron SputteringAuthors: C.H. Ortiz H.D. Colorado W. Aperador A. Jurado
- Effect of Heat Treatment on Wear behavior of Hybrid Aluminum Metal Matrix CompositesAuthors: A.M. Rajesh M.K. Kaleemulla S. Doddamani
- Studying the Possibility of Using Complex Esters as AW/EP AdditivesAuthors: I. Mukhortov E. Zadorozhnaya M. Кandeva I. Levanov
- The Effect of the Different Percentage of Pour Point Depressant (PPD) On the Tribological Properties of Palm Kernel OilAuthors: M.A. Dandan A. Yahaya S. Syahrullail
- Study of Mechanical and Sliding Wear Behavior of Al-25Zn alloy/SiC/Graphite Novel Hybrid Composites for Plain Bearing ApplicationAuthors: P.P. Ritapure Y.R. Kharde
- Visualization of Lubrication Film in Model of Synovial JointAuthors: P. Čípek D. Rebenda D. Nečas M. Vrbka I. Křupka M. Hartl
- Corrosion Rate and Wear Mechanisms Comparison for Aisi 410 Stainles Steel Exposed to Pure Corrosion and Abrasion-corrosion in a Simulated Marine EnvironmentAuthors: G.A. Rodríguez-Bravo M. Vite-Torres J.G. Godínez-Salcedo
- Hydrodynamic Lubrication of Textured Journal Bearing Considering Slippage: Two-dimensional CFD Analysis Using Multiphase Cavitation ModelAuthors: M. Tauviqirrahman A. Pratama Jamari Muchammad
- Three Body Abrasive Wear Behavior of Glass-Basalt PA66/PTFE Hybrid Composites in Multi pass ConditionAuthors: B.M. Rudresh B.N. Ravikumar D. Madhu B.V. Lingesh
- Ferrofluid Flow in the Presence of Magnetic Field Above Stretching SheetAuthors: G. Bognár K. Hriczó B. Stojanović Sz. Szávai
- Optimization of the Vibration Isolation Performance of an Impact-testing Machine Using Multi-walled Carbon Nanotubes Reinforced Elastomeric Machine MountsAuthors: K. Tsongas G. Mansour
- Electroless Nickel Copper Metallization as a Reinforcing Approach for Sintered Aluminium Metal Matrix CompositesAuthors: V. Kamburov R. Dimitrova A. Nikolov M. Kandeva S. Valkanov
- Characterization of the Tribological Properties of Bismuth-titanate Coatings Synthesized by Sol-gel on 316L Stainless Steel SubstratesAuthors: J. Bautista-Ruiz A. Chaparro J.J. Olaya