ResearchBib Share Your Research, Maximize Your Social Impacts
Sign for Notice Everyday Sign up >> Login

THERMAL ANALYSIS ON MICROELECTRONIC HEAT SINK BY CFD USING RECTANGULAR AND TRAPEZOIDAL FIN ARRAYS

Journal: International Journal OF Engineering Sciences & Management Research (Vol.4, No. 1)

Publication Date:

Authors : ; ;

Page : 120-131

Keywords : trapezoidal array of fins; rectangular array of fins; electronics cooling; heat sink;

Source : Downloadexternal Find it from : Google Scholarexternal

Abstract

The concern about thermal performance of microelectronics cooling is on the increase due to recent over - heating induced failures which have led to product recalls. Removal of waste heat from microelectronic systems with the use of heat sinks coul d improve thermal efficiency of the system. The present work investigates the effect of change in aluminum heat sink geometry on thermal performance Sinks with two models with rectangular and trapezoidal fins are taken. heat transfer analysis were conducte d to investigate the thermal performance of air cooling through heat sink rectangular cross section with dimensions of 55mm×1mm×20mm and the other of trapezoidal with dimension of 55mm× 0.25mm×20mm. Nine channels of each configuration are modeled on alum inium base. The measurements were performed under steady state with air velocity of 2 m/s, and at temperatures varying from 60°C - 110 0 C in steps of 10 0 C. Theoretical results are compared with numerical analysis with fluent15.0. Graphs are drawn, to show t he performance of array of rectangular and trapezoidal fins using CFD.

Last modified: 2017-01-31 19:23:25