EXPERIMENTAL BEHAVIOR OF COMPOSITE INFILLED COLUMN BY USING SILICAFUME & METAKAOLIN
Journal: International Journal of Civil Engineering and Technology (IJCIET) (Vol.8, No. 1)Publication Date: 2017-01-01
Authors : M. R. Ganesamoorthy; S. Arivalagan;
Page : 203-208
Keywords : Metakaolin; Silicafume; Steel-concrete; composite columns;
Abstract
Type of column that incorporates two materials or elements of design in its structure is a composite column. In engineering, a composite column may also be understood to mean a column of concrete reinforced by a steel core. The latter type of composite column is often used in construction due to its structural advantages, including corrosion protection and increased strength. These structures are intended to be load-bearing and have many advantages over plain steel or concrete .The steel backbone of a composite column lends increased strength and resistance to buckling. Since steel is lighter than concrete but also stronger, the necessary support structures are smaller and more lightweight than they would be if only concrete were being used. These advantages make composite columns an efficient and economical solution for large-scale construction projects. Use of Metakaolin and silica fume as partial replacement of cement in concrete for strength and economy. The proper dispersion of cement, Metakaolin and Silicafume in the concrete and composite column plays an important role in this study. The experimentation is performed for different water cement ratio of 0.35 to 0.5% for in composite column of Square and Circular Section. Then the specimens are to be tested on 7thday, 14thday, 28th day
Other Latest Articles
- CUSTOMIZED SPRING AND DAMPER OF AN ATV
- ASSESSMENT AND QUALITY ASSURANCE
- DESIGN OF EXHAUST SILENCER MUFFLER FOR TRANSMISSION LOSSES WITH THE PERFORMANCE OF A FOUR STROKE DIESEL ENGINE WITH AND WITHOUT MUFFLER SECTION
- ENVIRONMENTAL CONDITIONS MONITORING OF AAC BLOCKS USAGE OF HIGH RISE BUILDINGS AT TADEPALLI, ANDHRA PRADESH
- ANALYSIS AND EXPERIMENTAL STUDY ON STRENGTH AND BEHAVIOUR OF EXTERIOR BEAM-COLUMN JOINTS WITH DIAGONAL CROSS BRACING BARS AND STEEL FIBRES FOR IMPROVING THE JOINT DUCTILITY
Last modified: 2017-02-18 18:47:47