PEMBUATAN MEMBRAN ULTRAFILTRASI DARI POLIMER SELULOSA ASETAT DENGAN METODE INVERSI FASA
Journal: Jurnal Konversi (Vol.6, No. 1)Publication Date: 2017-04-01
Authors : Vera Indriyani; Yunita Novianty; Agus Mirwan;
Page : 11-16
Keywords : dimethylformamide; rejection coefficient; flux;
Abstract
Clean water treatment with membrane technology is a water treatment process with very good quality and suitable for drinking water treatment in developing countries because the membrane has a lot of advantages. One type of membrane separation operation is with ultrafiltration membranes. Ultrafiltration is a process of filtering particles in the size range of colloids, namely liquid while large molecules detained on the surface of the membrane and the solute with very small size can pass through the membrane. The purpose of this study was to determine the best composition of %wt of dimethylformamide in the manufacture of ultrafiltration membranes. Ultrafiltration membrane is made by varying the concentration of the additive of dimethylformamide which serves for the determination of membrane pore size and the concentration of acetone. Mixing materials done by stirring for ± 6 hours, polymer film printouts is coagulated for 1 hour in ice water (± 4 ° C) and then washed with running water and stored in a container containing formalin. Then conducted testing on the membrane using peat water where permeate that generated is measured the volume of each interval of 5 minutes to determine the membrane flux. Then analyzing the concentration of permeate to determine the coefficient of rejection, where the expected rejection is> 90%. Based on the research results, the best ultrafiltration membrane was membrane with composition wt% of dimethylformamide of 20; 24 and 28, where rejection coefficient average respectively was 98.15; 92.80 and 95.41%.
Other Latest Articles
- PEMANFAATAN KULIT SINGKONG SEBAGAI BAHAN BAKU ARANG AKTIF DENGAN VARIASI KONSENTRASI NAOH DAN SUHU
- PENGARUH LARUTAN BENFIELD, LAJU ALIR GAS PROSES, DAN BEBAN REBOILER TERHADAP ANALISA KINERJA KOLOM CO2 ABSORBER DENGAN MENGGUNAKAN SIMULATOR ASPEN PLUS V. 8.6
- PRODUKSI BIOGAS DARI SAMPAH BUAH DAN SAYUR : PENGARUH VOLATILE SOLID DAN LIMONEN
- PENGARUH METODE AKTIVASI PADA KEMAMPUAN KAOLIN SEBAGAI ADSORBEN BESI (FE) AIR SUMUR GARUDA
- PENGOLAHAN LIMBAH DETERJEN DENGAN METODE KOAGULASI-FLOKULASI MENGGUNAKAN KOAGULAN KAPUR DAN PAC
Last modified: 2017-03-31 16:33:27