Physical and technological factors of the formation of detonation capacity of blasthole charges of emulsion explosives
Journal: The Journal of Zhytomyr State Technological University. Series: Engineering (Vol.1, No. 79)Publication Date: 2017-05-29
Authors : V.A. Poplavskyi; V.H. Kravets; A.M. Shukiurov; V.V. Pavlenko;
Page : 197-201
Keywords : desensibilization; detonation speed; critical diameter; density; hydrostatic pressure; gas-generating process; shock wave; boulder.;
Abstract
Modern conditions of mining are characterized by a constant increase in the depth of the pit, as a result of this there is a change in the geological and mining conditions. The obtaining of the mined rock is provided by using the drilling-and-blasting method as the main process that influences the technical and economic indicators of the next processes and enterprises in general. The effectiveness of the explosion in rocks depends on the technology of blasting. In scientific and technical literature the influence of various natural and technological factors on the process of the explosion has been studied in detail. We developed methods and recommendations for calculating the parameters of mass blasting used in common projects in the blasting operation and ensure their implementation of getting the rock mass of different coarseness of grading. However, these methods are based on traditional formulas and empirical dependencies, according to which the parameters of location and charge blasting accepted as the same, despite the fact that the blocks that blasted may include different types of rocks, and this, in turn, causes predatory yield of sub-standard fractions. Therefore, the implementation of the design parameters of the blasting should be based on modern scientific achievements, interrelationships of geological and technological indicators and parameters with the least expenditure of labor and time in the design process. The article analyzes the impact of the physical condition and the composition of emulsion explosive, geometric parameters and conditions of charge blasting, characteristics of dynamic processes in the charge and the decomposed array for the manifestation of the phenomenon of desensibilization emulsion explosives.
Other Latest Articles
- Method of determination of the volume of opencut mining increasing the open-cast performance by ore
- EUROPEAN INTEGRATION: TREATMENT OF STONE PROCESSING ENTERPRISES WASTE IN UKRAINE
- The optimization of predicting the liquefy of pulp in a ball mill at variable flow of water in sand of the classifier
- NEW APPROACHES TO THE IMPLEMENTATION OF THE MINING TECHNOLOGY OF DIMENSION STONE USING A CLOSE-SET DRILLING
- Changing the physical and chemical composition of the soil in the area of man-made impact in urban areas
Last modified: 2017-07-05 20:46:49