Investigation of formaldehyde removal from synthetic contaminated air by using human hair

Background: Human hair can be used as an inexpensive and accessible adsorbent to remove a variety of pollutants from air. Although several studies have been done on removal of formaldehyde from wastewater by human hair, to date no study has investigated using hair to remove formaldehyde from air. Therefore, the aim of this study was to remove formaldehyde from synthetic contaminated air by a reactor packed with human hair. Methods: Air contaminated with formaldehyde was introduced into a cylindrical reactor packed with human hair at the initial concentration of 8500 mg/L. Formaldehyde concentration was measured in the influent and effluent of the reactor to indicate formaldehyde removal efficiency. Other measurements of parameters effective on formaldehyde removal were taken including amount of human hair and environmental temperature. Results: Results of this study revealed that each gram of human hair was able to remove 0.13 to 0.49 g of formaldehyde from air. Human hair adsorbed 98% of formaldehyde from synthetic contaminated air under 20˚C. These results demonstrate that increased temperature had a negative effect on formaldehyde removal. Conclusion: Results of this study show that human hair can be applied as a simple and inexpensive adsorbent to remove formaldehyde from industrial air exhaust. In addition, results of these tests can be considered as a small step to promote better air quality.