CHARACTERIZATION OF PRECIPITATES FORMED IN THE ALUMINUM ALLOY WITH ANTIMONY
Journal: Applied Engineering Letters (Vol.2, No. 1)Publication Date: 2017-03-31
Authors : K. Matuš; K. Gołombek; P. Palček; P. Boryło;
Page : 22-26
Keywords : Aluminium alloy Precipitates SEM Morphology;
Abstract
The aim of the article was to identify and characterize the precipitates formed in the aluminum alloys with the addition of antimony. The performed investigation was on the casting aluminium alloy based on ENACAlMg5Si2Mn (ENAC-51500) used in the automotive industry with the addition of antimony in an amount of 0.2 % for the first sample and 1.2 % for the second one. The main research technique was scanning electron microscopy, in order to evaluate the morphology and precipitates in the investigated samples, the backscattered electrons were used. Performed research allowed to determine the effect of the addition of antimony on the morphology of formed precipitates.
Other Latest Articles
- DAMAGE OF THE CuPb20 SLIDING BEARING
- FRICTION REDUCTION AND WEAR RESISTANCE ENHANCEMENT OF ALUMINUM/EPOXY COMPOSITES
- ANALYSIS OF PROPERTIES OF THE FRP REBAR TO CONCRETE STRUCTURES
- Rapid and sensitive methods for detection of Allorhizobium vitis, causal agent of grapevine crown gall
- Immobilization of two endoglucanases from different sources
Last modified: 2017-08-03 05:51:38