Atterberg Limits Prediction Comparing SVM with ANFIS Model
Journal: Journal of Geoscience, Engineering, Environment, and Technology (Vol.2, No. 1)Publication Date: 2017-03-01
Authors : Mohammad Murtaza Sherzoy;
Page : 20-30
Keywords : ;
Abstract
Support Vector Machine (SVM) and Adaptive Neuro-Fuzzy inference Systems (ANFIS) both analytical methods are used to predict the values of Atterberg limits, such as the liquid limit, plastic limit and plasticity index. The main objective of this study is to make a comparison between both forecasts (SVM & ANFIS) methods. All data of 54 soil samples are used and taken from the area of Peninsular Malaysian and tested for different parameters containing liquid limit, plastic limit, plasticity index and grain size distribution and were. The input parameter used in for this case are the fraction of grain size distribution which are the percentage of silt, clay and sand. The actual and predicted values of Atterberg limit which obtained from the SVM and ANFIS models are compared by using the correlation coefficient R2 and root mean squared error (RMSE) value. The outcome of the study show that the ANFIS model shows higher accuracy than SVM model for the liquid limit (R2 = 0.987), plastic limit (R2 = 0.949) and plastic index (R2 = 0966). RMSE value that obtained for both methods have shown that the ANFIS model has represent the best performance than SVM model to predict the Atterberg Limits as a whole.
Other Latest Articles
- Uniqueness Deposit of Sediment on Floodplain Resulting From Lateral Accretion on Tropical Area : Study Case at Kampar River, Indonesia
- Post-figurative and post-non-figurative trends in contemporary art
- Limestone Facies And Diagenesis On Tondo Formation At Kaisabu Village Bau-Bau City Southeast Sulawesi Province
- Using Side-Scan Sonar instrument to Characterize and map of seabed identification target in punggur sea of the Riau Islands, Indonesia
- The Portrait of A. N. Golitsyn
Last modified: 2017-08-04 23:19:51