RESEARCH THE EFFECTIVENESS OF THE DOUGH DIVIDER

In daily practice a person has to deal with the variety of processes that must be managed, that in recent years is one of the dominant problems. Object management - a process subjecting it to provide the required flow of processes in an object or change in its desired state. The basis of management is the acquisition and processing of information on the state of the object and the external conditions of his work to determine the impact, which should be attached to the object, to achieve management objectives. All processes in the management of the general laws are not dependent on specific goals and objects of management. The elements of the automatic control system (ACS) are connected with each other by means of the transmitted signals. Character conversion of signals in the object and the signals themselves are predetermined destination object in the process and can not be changed. This should be considered in the design of the ACS, although consideration of its properties and the nature of the signal quality is not critical. Automatic control systems are created to automatically without direct human intervention to maintain the desired mode of operation of various machine guns served by these facilities. Automatic control systems on their own, without any outside interference is kept constant or changed by a predetermined law of one or more physical quantities characterizing the processes occurring in the serviced sites, or yourself is determined depending on a number of conditions required or optimal control law subject. It is necessary to review and upgrade the automatic control management system dividing the range of vacuum piston divider to work efficiently.