Analysis Of Mubi Clay Deposit As A Furnace Lining
Journal: International Journal of Scientific & Technology Research (Vol.2, No. 12)Publication Date: 2013-12-15
Authors : Aremu; D.A.; Aremu; J.O.; Ibrahim; U.H.;
Page : 182-186
Keywords : Index terms Furnace lining; Clay; Composi;
Abstract
Abstract Mubi clay was investigated to examine if the deposit can be used as a furnace lining material. The result shows that the clay has a bulk density of 2.3gcm3 apparent porosity of 13.70 firing shrinkage of 9.6 thermal shock resistance of 8 cycles cold crushing strength of 253 kgcm2 loss on ignition of 4 and refractoriness of 1300 0C. The percentage composition of impurities is generally below 2.0 while iron II oxide account for 5.986. The chemical analysis shows that the percentage composition of Aluminium oxide Al2O3 is 18.1 while the Silica SiO2 content is 67.7. The results obtained from Mubi clay showed that the clay can be used for lining of heat treatment furnace melting furnaces for low melting point metals liquid metal ladles and portions of blast furnaces.
Other Latest Articles
- Design Of An Off Grid Photovoltaic System A Case Study Of Government Technical College Wudil Kano State
- Web Site Visit Forecasting Using Data Mining Techniques
- An Integrated Skew Detection And Correction Using Fast Fourier Transform And DCT
- Analysis Of Relationship Between Learning Achievement Of Tafsir Al-Quran And Arabic Learning Interests
- Effect Of Friction Stir Processing On Mechanical Properties And Microstructure Of The Cast Pure Aluminum
Last modified: 2014-03-17 17:43:58