Effect of Alccofine and Foundry Slag on Compressive Strength of High Strength Concrete
Journal: International Journal of Engineering Research (IJER) (Vol.6, No. 8)Publication Date: 2017-08-01
Authors : Saurabh Gupta Arjun Kumar Sanjay Sharma Devinder Sharma;
Page : 406-409
Keywords : High strength; concrete; Compressive; strength; Alccofine; Foundry; slag;
Abstract
This paper presents the results of an experimental investigation carried out for M-60 grade of concrete and evaluates the effect of Alccofine on compressive strength of concrete. High strength concrete is made by the partial replacement of sand with that of foundry slag and addition of Alccofine with cement. In this study, concrete of M60 grade is considered for a W/C ratio of 0.27 with the targeted slump of 170 mm for the replacement of 10%, 20%, 30% of aggregates (fine) with that of slag aggregate and adding of 3%, 6%, 9%, 12% of Alccofine respectively. This concrete mixed is studied for compressive strength.
Other Latest Articles
- Comparative Print Quality Analysis of Screen Printing and Liquid Ink Based Digital Printing Machines
- Machinability Study of Aluminium 6061 Alloy on End Milling Process
- Experimental Study about Soil Improvement with Glass Fibers
- A Novel Enhanced Oil Recovery Method for the Oilfields of Upper Assam Basin and Analogous Reservoirs
- A Smart Monitoring of Faults in Power Transformers and Maintenance Based on Wi-Fi
Last modified: 2017-11-10 23:40:34