PEMISAHAN DAN ANALISIS 137Cs DARI LARUTAN PELAT ELEMEN BAKAR U-7%Mo/Al
Journal: Urania Jurnal Ilmiah Daur Bahan Bakar Nuklir (Vol.22, No. 3)Publication Date: 2016-10-01
Authors : Dian Anggraini; Noviarty Noviarty; Yanlinastuti Yanlinastuti; Aslina Br. Ginting; Rosika Kriswarini; Arif Nugroho; Boybul Boybul;
Page : 143-154
Keywords : pemisahan cesium; metode pengendapan; penukar kation; zeolit Lampung; bahan bakar U-7%Mo/Al.;
Abstract
SEPARATION OF CESIUM FROM U-7MO/AL FUEL PLATE SOLUTION HAS BEEN DONE BY USING PRECIPITATION METHOD AND CATION EXCHANGE. The aim of this research is to get a valid method of separating cesium from U-7Mo/Al fuel plate solution through determination of parameter of method (accuracy, precision, and recovery). Precipitation method and cation exchange method that are used refer to standard ASTM 690-000 and research result of U3Si2/Al. Parameter method determination has been done by using 150 μL sample (U-7%Mo/Al fuel plate solution, 50 μL of standard solution in 2 mL of HCl 0,1 N. The sample solution was undergone precipitation process by using HClO4 concentrated and 225 mg of CsNO3 as carrier in tempherature 0oC for an hour, while exchange cation process was done by using 400 mg of resin zeolit Lampung. The analysis of 137Cs in CsClO4 and 137Cs - zeolit was done by gamma spectrometre. Determination of recovery method was done by comparing count value of 137Cs before and after separation process. Recovery of precipitation method was obtained 95.56 % with accuracy and precicion measurement of 0.375 % and 1.875 % respectively, while recovery of cation exchange method obtained 26.73 %. To sum up, the results show that precipitation method better than exchange cation method for separation 137Cs from U-7Mo/Al fuel plate solution.
Other Latest Articles
- KARAKTERISASI LAPISAN PENYERAP DAPAT BAKAR PADA PERMUKAAN PELET UO2 + DOPAN TiO2
- PEMBUATAN RADIONUKLIDA MOLIBDENUM-99 (99Mo) HASIL AKTIVASI NEUTRON DARI MOLIBDENUM ALAM UNTUK MEMPEROLEH TEKNESIUM-99m (99mTc)
- PENGARUH PARAMETER PROSES ELEKTRODEPOSISI TERHADAP PENENTUAN BERAT ISOTOP 235U DALAM PEB U3Si2/Al PASCA IRADIASI
- METODE PENGENDAPAN DAN PENUKAR KATION UNTUK PEMISAHAN CESIUM DALAM BAHAN BAKAR U3Si2-Al
- PHASE CHANGES ON 4H AND 6H SIC AT HIGH TEMPERATURE OXIDATION
Last modified: 2018-01-18 10:48:01