CORRELATION BETWEEN TOTAL FRACTIONAL COVER AND WARP BREAKAGE
Journal: International Journal of Engineering Sciences & Research Technology (IJESRT) (Vol.7, No. 3)Publication Date: 2018-03-31
Authors : Shilpi Akter IsratSharminMerin RakibulIslam Taskin Rahman; Dewan Murshed Ahmed;
Page : 648-652
Keywords : Total fractional cover; Warp breakage; Weaving performance; Fabric Structure.;
Abstract
In this study, the influence of total fractional cover on warp breakage during weaving is investigated by weaving plain and 1 3 twill structure with finer cotton yarns. For this purpose, we have taken cotton yarns of three different count and determined the total fractional cover for the constant value of EPI and varying the PPI for the same count of warp and weft yarn. The PPI is increased for the same EPI until frequent warp breakage occurred during weaving. While the value of total fractional cover increased by the value of PPI, the warp breakage increased with higher total fractional cover value. It was also found that higher fractional cover was attained with 1 3 twill structure without frequent warp breakage compared to the plain structure. This study shows too high total fractional cover disrupts weaving performance with frequent warp breakage.
Other Latest Articles
- HEAT SOURCE AND CHEMICAL REACTION EFFECTS ON UNSTEADY MHD FLOW PAST AN IMPULSIVELY STARTED OSCILLATING INCLINED PLATE WITH VARIABLE TEMPERATURE AND MASS DIFFUSION IN THE PRESENCE OF HALL CURRENT
- ENHANCEMENT IN DTN ROUTING WITH EFFICIENT BUFFER MANAGEMENT
- GUST FACTOR METHOD FOR WIND LOADS ON BUILDINGS AND INDIAN CODAL PROVISIONS
- FIXED POINT THEOREMS FOR PROBABILISTIC DENSIFYING MAPPINGS
- THERMAL SPRAY COATING: A STUDY
Last modified: 2018-03-31 19:38:46