Evaluation of Composite Laminated by Stacking Sequence with Tio2-Al2o3 Nanocomposite
Journal: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) (Vol.8, No. 2)Publication Date: 2018-04-30
Authors : P. Gunasekar S. Nithya S. Manigandan; J. Devipriya;
Page : 291-296
Keywords : Nano composite; Kevlar; Epoxy; Sonication & Titanium oxide;
Abstract
This paper investigates the effect of titanium oxide and aluminium oxide on Kevlar fiber. The TiO and Al O 2 2 3 are mixed with epoxy at the ratio of 1:2 and they are applied on the lamina to fabricate the laminate by vacuum bag moulding process. The laminate is made by the stacking sequence technique of orientation of 0/60/45/45/60/0. The laminate consisted of six layers of Kevlar fiber. Four types of specimen configurations are fabricated and tested for mechanical properties. The nano composites are mixed by sonication process. The results reveal that, the fiber with ratio of one part of TiO and two parts of the Al O yields high strength than the other types of specimen. In addition, 2 2 3 the results are validated computationally using a numerical method by applying Johnson cooks damage theory
Other Latest Articles
- The Longitudinal Strength Analysis of Aquaculture Floating Structure in Indonesia Sea Water
- A Comparative Study on Microstructure and Mechanical Properties of A356-B c and A356-Graphite Composites
- The Hydrodynamics Performance of Aquaculture Fishing Vessel in Variation of Deadrise Angle and Sponson
- MANAGEMENT STRATEGIES FOR CHILDREN WITH SPECIAL NEEDS IN EARLY YEARS
- Improvement of Abrasive and Edge Cutting Machining Efficiency through Theoretical Analysis of Physical Conditions
Last modified: 2018-07-20 20:01:48