ANALYSIS OF WEAR AND SEM CHARACTERISTICS ON FERROUS COMPOSITES THROUGH POWDER METALLURGY METHOD
Journal: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) (Vol.8, No. 4)Publication Date: 2018-08-31
Authors : K. RAMADURAI V. SATHAN RAJ; R. VINOTH;
Page : 609-614
Keywords : Iron; Density; Metal Matrix; Alumina; Bagasse Fly Ash; Powder Metallurgy; Austenitization; Mechanical Properties & SEM;
Abstract
Iron is the most commercially used metal in various fields from the ancient period. Nowadays its application in the marine and aerospace fields gets reduced gradually due to the density and ease of corrodibility nature. In this study the iron properties are optimized without compromising its hardness and strength. The metal matrix is formed in iron by adding alumina and bagasse fly ash as an alloying element. This study is done by powder metallurgical route. Also, experimental analysis is done on composite material after the sintering process at austenitization temperature. The wear test are taken for composite to check mechanical properties and the Scanning Electron Microscope (SEM) is used to understand the fine dispersion of alloying element in the composite. Finally, the samples are benchmarked with each other to identify that it is valuable one.
Other Latest Articles
- NUMERICAL AND EXPERIMENTAL THERMAL ANALYSIS OF AL6061 ALLOY FRICTION STIR WELDING
- ROOF TILES PREPARED BY USING FLY ASH AND ANALYZING MECHANICAL PROPERTIES
- METALLURGICAL INVESTIGATIONS ON BIMETALLIC WELD JOINTS IN AUSTENITIC/FERRITIC STAINLESS STEELS FOR PAPER-PULP INDUSTRIES
- PREPARATION AND MECHANICAL CHARACTERIZATION OF AL7075-SILICON NITRIDE MMC’S
- PREDICTION OF EFFECT OF REFRIGERATION SYSTEM PARAMETERS ON THE PERFORMANCE OF A VAPOUR COMPRESSION REFRIGERATION SYSTEM USING DESIGN OF EXPERIMENTS
Last modified: 2018-10-17 19:21:16