PERFORMANCE COMPARISON OF POWER SYSTEM STABILIZER WITH AND WITHOUT FACTS DEVICE
Journal: International Journal of Advances in Engineering & Technology (IJAET) (Vol.7, No. 3)Publication Date: 2014-07-01
Authors : Amit Kumar Vidyarthi; Subrahmanyam Tanala; Ashish Dhar Diwan;
Page : 798-806
Keywords : PSS; SVC; SSSC; UPFC; FACTS.;
Abstract
Power system damping through coordinated design of power system stabilizer (pss) & different types of FACTS devices (SVC, SSSC & UPPC) is presented in this paper. In the condition of single phase fault power system stabilizer is enough to damp the oscillations for the two area system but the settling time increases for the whole system parameter, but in the case of three phase faults the whole system parameter goes into unbalanced condition and the machine losses its synchronism even in the presence of power system stabilizer, in that case PSS is not enough to suppress the faults, so the other compensator must put into action for the better stability of the two area system. PSS including with FACTS devices reduce the settling time and enhance the response time of the system for single phase faults and damp the oscillation for three phase fault and make the system stable. This paper contains coordinated simulink model of PSS & different types of FACTS devices for two area systems & checked for single phase fault and three phase fault condition with & without FACTS devices.
Other Latest Articles
- PRECIPITATION AND KINETICS OF FERROUS CARBONATE IN SIMULATED BRINE SOLUTION AND ITS IMPACT ON CO2 CORROSION OF STEEL
- HARMONIC STUDY OF VFDS AND FILTER DESIGN: A CASE STUDY FOR SUGAR INDUSTRY WITH COGENERATION
- LOAD - SETTLEMENT BEHAVIOUR OF GRANULAR PILE IN BLACK COTTON SOIL
- JOINT CHANGE DETECTION AND IMAGE REGISTRATION METHOD FOR MULTITEMPORAL SAR IMAGES
- JOINT CHANGE DETECTION AND IMAGE REGISTRATION METHOD FOR MULTITEMPORAL SAR IMAGES
Last modified: 2014-07-04 20:15:11