Analysis of Cold Formed Sections of Steel Angle under Tensile Load by Numerical Method

The effective sectional area concept was adopted to conduct the analysis of cold-formed Tension members. ANSYS software was utilized to simulate the behavior of cold formed steel angle under tension load. The paper describes the results from a finite element investigation into the load capacity tension members of single angle sections and double angles sections of 1.5 mm and 1.6 mm under plain (without Lipped) and with Lipped conditions subjected to tension. Results were recorded as the load carrying capacity increases for connected to the opposite side of the gusset than the connected to same side. It observed load vs deflection, Analyses are compared with experimental results. Citation: A. Paulmakesh, Dr. S. Arivalagan. "Analysis of Cold Formed Sections of Steel Angle under Tensile Load by Numerical Method." Global Research and Development Journal For Engineering 4.1 (2018): 5 - 11.