MONITORING AND CONTROLLING OF TEMPERATURE USING CAN ARCHITECTURE
Journal: BEST : International Journal of Management, Information Technology and Engineering ( BEST : IJMITE ) (Vol.2, No. 6)Publication Date: 2014-06-30
Authors : N DINESH KUMAR; GELLA AJAY KUMAR; MOVVA SRIKANTH;
Page : 61-68
Keywords : Controller Area Network; Microcontroller; Nodes; Protocol; Transceiver;
Abstract
CAN is a two-wire, half duplex, high-speed network system and is well suited for high-speed applications using short messages with the help of controller. The CAN transceiver is used to transmit and receive data. These Transceivers are specially designed for high-speed differential data transmission between the CAN controllers and the physical differential bus lines. This paper discuss in detail about temperature monitoring and control based on the CAN protocol. The temperature changes of LM135 sensor are measured by the inbuilt ADC and transmitted to the other node using the CAN Bus. Then other node will display the result on the LCD and based on the temperature control action is takes place in the temperature node.
Other Latest Articles
- Assessing the Role of Internal Control System Components in Kenyan Public Universities: A Case Study of Jomo Kenyatta University of Agriculture and Technology
- ANALYSIS & PREDICTION OF MISCHIEVOUS BEHAVIOR OF VEHICLE USING ANPR AND DBSCAN
- LOCATION AWARE RECOMMENDATION SYSTEM
- OPTIMIZATION OF ROASTING ROBUSTA SUKAMAKMUR COFFEE WITH OF RESPONSE SURFACE METHODOLOGY
- EMBEDDED CONTROLLER FOR SAFETY IN AUTOMOBILES
Last modified: 2014-07-16 15:40:17