REGISTRATION AND SURFACE INSPECTION OF AUTOMOTIVE PRESSED PARTS BASED ON POINT CLOUD GENERATED BY OPTICAL MEASURING TECHNIQUES
Journal: Mobility & Vehicle Mechanics (Vol.43, No. 4)Publication Date: 2017-12-28
Authors : Milan Blagojević Miroslav Živković Marko Topalović;
Page : 1-11
Keywords : 3D digitizing; Triangulation; Registration; Inspection; CAD/CAM/CAE;
Abstract
Modern quality control has become unthinkable without optical measuring systems which are intensively used in automotive industry. This paper shows the analysis of preparation of models in terms of proper positioning in relation to the digitized model and the correct interpretation of the results of quality control. Experimental results verifying the method and the theory are shown. Part of tool for pressing and fabricated physical model of passenger car's suspension control arm is compared to CAD model. Presented results of measurements show that the optical measuring systems are powerful tool for quality control, analysis and discovering of causes of faults.
Other Latest Articles
- ACOUSTICAL TENSOR AND ELASTIC WAVE PROPAGATION IN ANISOTROPIC MATERIALS USED IN AUTOMOTIVE INDUSTRY
- CALIBRATION CERTIFICATION OF VEHICLE WHEEL ALIGNMENT LINE USING PHOTOGRAMMETRY
- DESIGN FOR RECYCLING – THINKING OF THE END AT THE BEGINNING
- A PROPOSED MODEL FOR OPTIMIZING THE DRAWBAR PULL FOR OFF-ROAD VEHICLES
- INFLUENCE OF VANES SHAPE ON THE HIGH FREQUENCY NOISE OF VENTILATED DISC BRAKES IN HEAVY VEHICLES
Last modified: 2019-05-14 05:35:30