Preparation of Fan Coil Unit using Revit Software

This project “Fan coil unit preparation by using Revit software” deals with the study of air conditioner and water conditioner system in a single unit. The main object behind this project is to supply chilled water through MS pipes based on load calculations by considering the required standards. In this pipe design calculations are done by using the AUTODESK REVIT MEP software to design pipes with proper adjustments and fittings. This fan coil unit system is to be designed only for places where natural ventilation is available. The multifunctional system which can provide cold water, refrigeration effect and air conditioning effect with regular air or space conditioning system. Fan coil unit is based on indirect refrigeration system mostly used as secondary refrigeration system. In this project we have using water as primary refrigerant. Along with this, air and water systems are used primarily for perimeter building spaces with high sensible loads and where close control of humidity is not a primary criterion. These systems work well in the residential buildings, office buildings, hospitals, schools, apartment buildings, and other buildings where their capabilities can meet the project design intent and criteria. In most climates, these systems are designed to provide all of the required heating and cooling needs for perimeter spaces, and simultaneous heating and cooling in different spaces during intermediate seasons. A. Vijay kumar | O. Ajay kumar | K. Bala Kumar | M. Dinesh kumar ""Preparation of Fan Coil Unit using Revit Software"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23376.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23376/preparation-of-fan-coil-unit-using-revit-software/a-vijay-kumar