Electricity Meter Reading using GSM

This system is designed for reading electrical energy consumed in units and in kyats to display on an LCD screen to the user. This system becomes necessary for the consumer to know as to how much electricity is consumed to control electricity bill within user budget. In this system, the consumer will get energy consumption data on a real time basis on an LCD display. The same data is sent through GSM modem to the electricity department via SMS. AT Mega 328P microcontroller is interfaced to the voltage divider and current sensor to get the Watt Hour pulses. The microcontroller then processes these pulses according to the program written in it, to calculate the units consumed and cost involved. Further, it gives the command to the SIM loaded GSM modem for sending the data to the electricity department via SMS. Further, this system can be enhanced by to control the electrical appliances remotely via SMS. Moreover, this system can reduce human efforts needed to record the meter reading which is till now recorded by visiting every home individually. Khin Su Hlaing | Hla Yamin | Myo Su Su Theint "Electricity Meter Reading using GSM" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26524.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26524/electricity-meter-reading-using-gsm/khin-su-hlaing