The Design and Development of Transitional UAV Configuration
Journal: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) (Vol.9, No. 4)Publication Date: 2019-08-31
Authors : Karkera Yathish Siddalingappa Pk Sheldon Mascarenhas Chinthan Dsouza; Hitesh Bali;
Page : 543-548
Keywords : Transitional Aircraft; Aircraft Design; UAV; VTOL & RC Aircraft;
- CFD Analysis of the Effect of Mach Number on Scramjet Combustion
- Numerical Analysis of Supersonic Scramjet Combustion Engine with Double Cavity Configuration at Mach 2 Fuel Injection
- CFD Analysis of Cavity Based Combustion of Hydrogen at Mach Number 1.4
- Computational Analysis of Hydrogen-Fueled Scramjet Combustor with Diamond-Shaped Strut Injector at Mach 4
- Mach Number of A Shock Wave: Effect of Vacuum Pressure and Diaphragm Thickness
Abstract
The transitional aircraft configuration is designed and developed, with a transitioning propulsion mounts from a hover mode to forward flight mode. Calculating the appropriate values of design parameters and performance characteristics was done initially keeping in mind, the take-off weight, usability and the payload carried by the aircraft. Complete modelling of the wing using Catia V5 and designing it for flow and structural analysis using ANSYS. The NACA 4415 airfoil with optimal dimensions is considered for the wing. The laser cutting technique is used in the fabrication. The fabricated model has been precision machined with the lightest materials to reduce weight and increase the efficiency. The autonomy is achieved with required configuration and coding using the KK2 board with manual PID tuning, thus gave full control at hand. The VTOL mechanism was built from scratch and is wirelessly controlled for flight operations.
Other Latest Articles
- Clinical, diagnostic and treatment of mental disorders as a component of epilepsy
- Robotic Exoskeletons: A Review on Development
- Prediction of Premature Ovarian Insuffi ciency and prevalence of medical diseases
- The Design and Fabrication of a Compound Die to Make Hexagonal Washer
- The Design and Analysis of A Brake Disc of the Two Wheeler
Last modified: 2019-10-03 21:11:08