Design and Fabrication of Swing Mechanism Device for Power Production in Sea Waves

This project is about a swing, which is used by sea waves that produces electricity while being used. In its construction simple, the swinging action of the swing makes the horizontal beam member turns through some angle and continues it's to and fro motion now in this motion is transferred to a link which transfers this angular motion into linear one as well as amplifies the same. This amplified motion is then transmitted to a free wheel that using flexible links. The free wheel turns this linear reciprocating motion in to circular one directional motion and transmits the same to flywheel. The flywheel is connected to a generator via a specific transmission to increase the speed at generator end. The generator converts the mechanical energy into electrical and thus electricity is produced. The swing generates electricity while being used only. The electricity that produced can be used for local use. The electricity that produced is cost free and is economical friendlier. In this power generation system produce an AC form. This is converted to DC and store the battery to further use. It can certainly lower down the load on main grid thus helping in saving electricity. This swing electricity power generator is not only generates electricity but it can be also very useful tool to educate children to learn to conserve energy. Along with this project uses that. Citation: R. Girimurugan, K. Anandhu, K. S. Mahendran, A. Levin Harrisson, S. Manoj. "Design and Fabrication of Swing Mechanism Device for Power Production in Sea Waves." Global Research and Development Journal For Engineering 4.12 (2019): 7 - 10.