TOPOLOGY DESIGN AND MODAL ANALYSIS OF A BRACKET VIA FEA
Journal: Applied Engineering Letters (Vol.4, No. 3)Publication Date: 2019-09-30
Authors : E. Gülbahçe H. Ç. Sezgen A. Çakan;
Page : 102-105
Keywords : Topology design; optimization; bracket design; FEA; ANSYS;
Abstract
In this study, topology optimization of a jet engine bracket which was proposed from GE Aviation challenge for improving the brackets is presented using finite element analysis (FEA). The minimum mass,maximum equivalent stress and first natural frequency are selected for the objective functions to topology optimization. Then, topology
optimization procedure is implemented according to the identified boundary conditions and objective functions. Finally, the manufacturing model is obtained and compared with the original model according to the maximum equivalent stress, mass reduction and first natural frequency. Also, modal analysis and static analysis results of the proposed models are presented.
Other Latest Articles
- SYSTEM IDENTIFICATION BASED INVERSE KINEMATICS ANALYSIS AND CONTROL OF A MULTI-DOF ROAD SIMULATOR
- Indicadores ambientales para la formación inicial docente en la Universidad Nacional de Educación
- RESEARCH OF WATER HYDRAULIC COMPONENTS AND SYSTEMS FROM ASPECTS OF QUALITY OF LIFE
- MECHANICAL BEHAVIOUR OF SMALL LOAD BEARING STRUCTURES FABRICATED BY 3D PRINTIN
- EFFECT OF ALUMINA AND GRAPHENE ON MECHANICAL AND TRIBOLOGICAL BEHAVIOUR OF Al-7075 HYBRID COMPOSITE
Last modified: 2019-12-14 07:38:09