To Study the Properties of Concrete with Partial Replacement of Aggregates with Industrial and Construction Waste
Journal: International Journal of Trend in Scientific Research and Development (Vol.4, No. 1)Publication Date: 2019-12-09
Authors : Achal Jain Er Nitin Thakur;
Page : 1075-1079
Keywords : Civil Engineering; Copper Slag; Recycled aggregate; Concrete; Workability; Compressive strength;
Abstract
Natural resources are depleting worldwide while at the same time the generated wastes from the industry are increasing substantially. The sustainable development for construction involves the use of nonconventional and innovative materials, and recycling of waste materials in order to compensate the lack of natural resources and to find alternative ways conserving the environment. So, this paper presents the results of an experimental investigation carried out to evaluate the mechanical properties of concrete mixtures in which fine aggregate sand was replaced with Copper Slag CS while coarse aggregates was replaced by recycled concrete aggregate RCA from demolished structure. Both the fine and coarse aggregate were replaced with percentages 0 for the control mixture , 10 , 20 , 30 , of Copper Slag by weight. Tests were performed for properties of fresh concrete and hardened Concrete. Slump test was conducted to determine the workability of the various design concrete mix. Compressive strength and split tensile strength were determined at 7, 28 days of curing. The results indicate that workability decreases slightly with increase in Copper Slag percentage, though workability for the sample were within the prescribed limit for M25 concrete. Test results indicate significant improvement in the strength properties of plain concrete by the inclusion of CS alone while a reverse trend in observed for increasing percentage of RCA in the sample. The synergistic effect of CS and RCA on the designed sample concrete revealed that the percentage of CS is the more decisive factors than the percentage of RCA in deciding the performance of the concrete in terms of compressive and tensile strength. The outcomes of this research work showed that Copper slag and recycled concrete aggregate can be effectively used in structural concrete as a replacement of fine aggregate sand and coarse aggregate respectively. Futher, it substantiate towards sustainable construction approach because of its dual advantage of controlling menace of solid waste disposal along with its subsequent environmental pollution and increasing the cost efficiency and carbon efficiency of the product. Achal Jain | Er Nitin Thakur "To Study the Properties of Concrete with Partial Replacement of Aggregates with Industrial and Construction Waste" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019, URL: https://www.ijtsrd.com/papers/ijtsrd29835.pdf Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/29835/to-study-the-properties-of-concrete-with-partial-replacement-of-aggregates-with-industrial-and-construction-waste/achal-jain
Other Latest Articles
- Experimental Investigation of Properties of Concrete with Partial Replacement of Aggregates with Industrial and Construction Waste
- Extraction of Catechins from Areca catechu L.Peel with different Solvent Type for Feed Additive of Broiler
- There is not a Case for 'Black Hole' Evaporation and Explosion, but Perhaps for Hawking Radiation
- Brush Less Dc Motor
- Determination of Quality of Iced Freshwater Species Based on Total Volatile Base Nitrogen (TVB-N) and Microbial Contents Test
Last modified: 2020-01-08 16:31:57