Study on Overhead Circular Water Tank using with and with Out Center Column by Staad Pro V8I

Elevated water tanks models are designed using STAAD Pro. The columns are taken circular for both tanks and diameter are 300 mm and height is 15 meter. The height of water tank is 4.3 meter and diameter is 8 meter for circular water tanks. Capacity of water stored is 200KL or 200000 liter. These models are analyzed for dead load, water load and seismic load. Dead load was designed according to IS 875 1987 Part 1 and Seismic load was designed using response spectrum method for earthquake zone III of India using IS 1903 2002. For analyzing a elevated water tank one has to consider all the possible loadings and see that the structure is safe against all possible loading conditions. Capacity of the water tank is considered 200000 L. There are several methods for analysis of different frames like finite element method. Two tanks are design for 200KL capacity in circular tank without center column and circular tank with center column. The height is kept same for both water tanks that is 21 m from ground level. Mahesh Kumar Pal | Nitesh Kushwaha ""Study on Overhead Circular Water Tank using with and with Out Center Column by Staad Pro V8I"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29942.pdf Paper Url : https://www.ijtsrd.com/engineering/civil-engineering/29942/study-on-overhead-circular-water-tank-using-with-and-with-out-center-column-by-staad-pro-v8i/mahesh-kumar-pal