Multiple Jet Air Cooling Relating with Reynolds Number and Nusselt Number
Journal: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) (Vol.10, No. 2)Publication Date: 2020-05-30
Authors : Niranjan Murthy;
Page : 169-178
Keywords : Multiple Air Cooling; Heat Transfer Augmentation & Vertical and Horizontal Jets;
Abstract
The present study is a multiple air jet cooling. In the present research work, the tests data of cooling abilities of air jets were reported. The test surface considered is made up of copper. It is selected because of its higher thermal conductivity. The vertical and horizontal jets of each 0.025 cm and 0.05 cm were tested. These jets are organized in an array of 7 x 7 square type with jet spacing of 3 mm. The Reynolds number ranges between 1,200 and 4,500 were considered for this investigation. The heat flux has varied from 25 to 250 W/m2 . A non-dimensional relationship is established in this study for both jets of 0.05 cm and 0.025 cm diameter. It is to be noted that heat flux is a strong function on Nusselt number and other parameters, such as Reynolds number. Distance between the test plate and nozzle exits were insignificant.
Other Latest Articles
- Experimental Investigation on Performance and Emissions Characteristic of Dedicated CNG Engine
- Experimental Investigation of Quenching Temperature Influence on The Mechanical Properties of H13 Steel
- Effect of Coil Design on Tube Deformation in Electromagnetic Forming
- Development of Repair Kits for Reciprocating/Rotary Couplings of Transportation and Production Equipment
- A Novel Technique for Combining Conventional and Flow Spinning with Simultaneously Burnishing Processes
Last modified: 2020-05-30 22:41:52