CALCULATION AND PARAMETER SELECTION FOR CONVEYOR BELT
Journal: Zbornik Veleučilišta u Rijeci - Journal of the Polytechnic of Rijeka (Vol.2, No. 1)Publication Date: 2014-07-01
Authors : Tatjana Gregorović; Dario Bognolo; Marko Kršulja;
Page : 313-328
Keywords : conveyor belt; coal dust; idlers; transportation;
Abstract
This paper presents the calculation for conveyor belt for continuous transportation of material. The investigated conveyor is designed for transportation of coal dust, the selected length of the conveyor belt being 300 meters with the rising angle of 10°. The required carrying capacity was 150 tons per hour. All necessary functional components of the conveyor belt were calculated according to the standards, as well as the desired final output. The paper describes the process of selecting conveyor belt speed, belt width, the calculation of operating power, the choice of dimensions of the drive drum and bearing rollers. The standard model for belt conveyor calculation was used. The forces occurring in the process were investigated and the method of force contour calculation was used for control.
Other Latest Articles
- APPLICATION OF THE POISSON DISTRIBUTION IN THE STATISTICAL ANALYSIS OF OCCUPATIONAL INJURIES IN THE COMPANY “LUKA RIJEKA”(“THE PORT OF RIJEKA”)
- GREENHOUSE GAS EMISSIONS, ESPECIALLY FROM TRAFFIC (Contribution to the analysis of greenhouse gas emissions, especially from traffic)
- SELECTION OF TOOL GEOMETRY IN REGARD TO MATERIAL BEHAVIOR DURING DEFORMATION PROCESS
- CONTAINER TRAFFIC ON THE FAR EAST – NORTH OR SOUTH EUROPE ROUTE
- MVC MODULAR FRAMEWORK BUILDING
Last modified: 2020-08-03 14:02:23