A Study of Preparation and Analysis of a Synthetic Polymer Coagulant
Journal: International Journal of Water and Wastewater Treatment (Vol.6, No. 1)Publication Date: 2020-03-02
Authors : Jeje JO;
Page : 1-4
Keywords : Synthetic polymer; Starch; Activated carbon; Electrolyzing; Coagulant;
Abstract
This study addressed the limitations of using inorganic coagulants in the treatment of surface water by evaluating the efficiency of synthetic polymers as coagulants agents in the chemical purification process. The limitations of inorganic coagulants include; discharge of residual metals into downstream waters, over dependence on pH, high dosage and high sludge production. A synthetic polymer coagulant was prepared by dispersing 1g of cassava starch in 100 ml distilled water, making it up to a litre with hot water (80°C-100°C), adding 1 ml of 1N H2SO4 and electrolyzing by means of a stabilized power supply unit at a current of 0.15 amps using aluminium rods as electrodes. Addition of 1 g of activated carbon to serve as a coagulant aid (Sample A) resulted in a better turbidity removal than the one without the aid (Sample B). Sample A was found to be almost as effective as alum both at neutral and basic mediums causing better than 80% turbidity removal at pH 7 and more than 89% turbidity removal at pH 9 with dosage of 20 ml (20 g) of sample A. Preliminary cost analysis showed that sample A was more economical than alum.
Other Latest Articles
- Sustainable SBR Treatment: Treatment Efficiency, Energy, Carbon Footprint
- A Study of Toxic Dosage of Combined Selenium and Hexavalent Chromium on Activated Sludge Bacteria
- Stamper K . Word by word: secret life of dictionaries
- The Effect of Packed-beds on Residence Time Distribution and Hydraulic Behavior of Plug Flow Reactor
- Innovation for New Anaerobic Domestic Wastewater Treatment Recycling System in Developing Countries
Last modified: 2020-08-29 23:48:14