Numerical analysis of layered composite panel behavior with interlaminar defects subject to dynamic loads
Journal: Structural Mechanics of Engineering Constructions and Buildings (Vol.15, No. 2)Publication Date: 2019-05-14
Authors : Aleksandr Medvedskiy; Mikhail Martirosov; Anton Khomchenko;
Page : 127-134
Keywords : composite panel; composite failure criteria; interlaminar defect; nonstationary load; numerical modeling; finite element method (FEM);
Abstract
Aims of research. Polymer unidirectional composite laminate panel behavior with interlaminate defects under action of different dynamic loads is consider. Methods. Normal modes and eigenvalues of rectangular composite panels in the presence multiple delamination different sizes ellipsoidal form are calculated. The dependences of the maximum deflections from the frequency of the stationary pressure field action are constructed. Distribution field of panels plies failure index under action of nonstationary pressure field by using different failure criteria for composites is determined. Results. Modeling methodology composite panels behavior in the presence multiple interlaminar defects under action of different dynamic loads is developed. Analysis of failure panel with the use of different failure criteria for composites is carried out.
Other Latest Articles
- Numerical analysis of the stress-strain state of thin shells based on a joint triangular finite element
- Formation surfaces of Monge by the kinematic method in AutoCAD environment
- Development of the design module of the software and hardware complex to ensure the safety of mutually influencing HPS
- Determination of parameters of plastic deformation of elliptic membranes
- Determining the width of the workpiece under bending conditions with stretching of the stamped part
Last modified: 2020-08-30 04:11:01