Criteria of strength of walls from large masonry blocks
Journal: Structural Mechanics of Engineering Constructions and Buildings (Vol.15, No. 4)Publication Date: 2019-09-22
Authors : Konstantin Pyatikrestovsky;
Page : 271-277
Keywords : masonry; orthotropic wall materials; shear strength criteria;
Abstract
Aims of research. The task is to apply modern strength criteria of anisotropic materials for the calculation of multilayer walls made of cellular concrete and silicate large masonry materials, which differ in exact dimensions and allow for thin-seam masonry with adhesive seams. Proposals for the inclusion in the design standards of guidance that takes into account the work of wall materials in complex stress states will be presented in a series of publications. Methods. The strength criteria of G.A. Geniev in a rather simplified form are used. The volumetric stress state of walls made of orthotropic materials is considered. The basis for the construction of strength criteria are three possible different mechanisms of destruction - separation, compression and shear. For modern thin-walled masonry is characterized by a combination of compressive (vertical) and shear (horizontal) loads. Of particular interest is the work of the masonry shift, since the plane stress state is not sufficiently studied. The article is devoted to the construction of the criterion of masonry shear strength. The peculiarity of the proposed calculations is the comparative simplicity of the strength criteria due to the accepted hypotheses. Results. The final expression of the shear strength criterion and the sequence of the shear strength verification in the case of simple loading are presented. The article is preliminary for a series of calculations and results of experimental studies of the walls under different operating conditions and different loads.
Other Latest Articles
- Theory of “dissolution” and “condensation” of the physical geometric characteristics of an arbitrary cross-section under the action of torsion with bending
- Numerical analysis of mechanical safety parameters of Congress Hall building in Chelyabinsk
- Large-span structures in diploma projects of students architects of RUDN University
- Experimental determination of the limiting flexibility of eucalyptus wood for axially compressed elements
- The stability of geometrically nonlinear plate systems under the action of dynamic loads
Last modified: 2020-08-30 04:13:48