Numerical simulation of the front of an air shock wave in a ground and air explosion in the software package LS-DYNA
Journal: Structural Mechanics of Engineering Constructions and Buildings (Vol.14, No. 6)Publication Date: 2019-01-29
Authors : Oleg Mkrtychev; Anton Savenkov;
Page : 467-474
Keywords : reinforced concrete structures; explosive effects; air shock wave; nonlinear dynamics; explicit dynamics; finite element method; numerical methods;
Abstract
Introduction and objectives. When calculating buildings and structures for special combinations of loads caused by the action of air shock waves, it is necessary to determine the main parameters of the actual load. The regulatory approach implemented in modern regulatory documents proposes the use of simplified calculation methods based on the use of equivalent static loads. The aim of the study is to obtain the basic parameters of air shock waves, as well as to consider the nature of the propagation of the shock wave front during an explosion on the ground and in the air, using numerical simulation. Materials and methods. To obtain the basic parameters of air shock waves, high-precision numerical methods implemented in the modern LS-DYNA software package are considered. To describe the explosion process, the LagrangianEulerian approach is used. Results. Isopoles and graphs of excess overpressure Δ Р ф over atmospheric pressure in an air shock wave were obtained when the epicenter of the explosion was located at ground level and in the air, as well as at a distance from the designed structure. Conclusions. The considered method of numerical simulation allows to obtain the main parameters of air shock waves, which can be used for further calculation of building structures.
Other Latest Articles
- Comparative analysis of efficiency of use of finite elements of different dimensionality in the analysis of the stress-strain state of thin shells
- Effect of stress concentration in a beam of rectangular cross section in the region of attachment of the longitudinal efforts
- The use of fixed points in experimental research of the internal friction of material
- Calculation of seismic qualities of the damper and vibration transducer with the possibility of their use in aircraft
- The research of the stress-strain state with local thinning in pipelines and determination of allowable values of concentration stress and strain
Last modified: 2020-08-30 04:16:51