Analytical calculation of the deflection of a beam truss with double bracing

A statically determinate planar truss has rectilinear belts and a triangular lattice consisting of double braces. The four links make it seemingly statically indeterminate. The derivation of the formula for the dependence of the deflection on its dimensions and the number of panels is given. Forces in rods are determined in symbolic form by cutting out nodes from the solution of a system of linear equations in the system of computer mathematics Maple. To determine the deflection, the Maxwell - Mohr’s formula is used. Rods (except all rigid support) are assumed to be elastic with the same rigidity. The generalization of individual solutions to an arbitrary number of panels is done by induction. Operators of the Maple system from the calculation data yield linear homogeneous recurrence equations for the coefficients of the desired formula. The solutions of these equations give the general terms of the obtained sequences. Formulas for three types of loads are obtained and compared (the uniform loading of the nodes of the lower and upper belts and the concentrated force in the middle of the span). Curves of the dependence of deflection on the number of panels have weakly expressed minima. The dependencies of the forces in the most compressed and stretched rods on the number of panels are derived. Also given are asymptotic estimates for solutions in accordance with the number of panels in fixed spans of the construction and at a given total load.