Seismic Performance of RC Frame Building with Different Position of Shear Wall
Journal: International Journal of Trend in Scientific Research and Development (Vol.4, No. 5)Publication Date: 2020-09-08
Authors : Bharath V B Kuldeep Singh Solanki Aashutosh Raj Yadav;
Page : 94-98
Keywords : Civil Engineering; earthquake; Seismic; load; gravity; strenght; wall; FEM; RC Frame and structure;
Abstract
An earthquake force is a very strange force and behaves quite differently than Gravity and Wind loads, striking the weakest spot in the whole three dimensional structure. It's not earthquake that kills, in fact ignorance in design and poor quality construction results in many weaknesses in the structure that cause serious damage to life and property. Masonry Infill are frequently used to fill the gap between the vertical and horizontal resisting elements of the building frames with the assumption that these in fills will not take part in resisting any kind of load either axial or lateral. Hence, its significance in the analysis is generally neglected by the designer. In fact, infill wall and shear wall considerably enhance the rigidity and strength of the frame structure. Various researches suggest that the bare frame has comparatively lesser stiffness and strength than the infill frame and frame with shear wall, therefore their ignorance cause failure of many multistorey buildings when subjected to seismic loads. In the present study, the finite element analysis of RC frame models viz. a bare frame a frame with shear wall considering infill a bare frame with shear wall has been carried out and the number of storeys vary as G 3, G 5, G 7 and G 9. Linear analysis of all RC frame structures has been performed as per IS 1893 Part 1 2002 and IS 456 2000. In this study only in plane stiffness of masonry wall has been considered and infill panels modelled as equivalent diagonal strut elements. The behaviour of buildings subjected to Gravity and Seismic loads with the help of Response Spectrum Analysis using FEM based software and the effect on Time Period, Mass Participation factor, and Storey Drift has been observed. Strength and Rigidity of RC bare frame structures is found increasing after the inclusion of infill panels and shear wall. Bharath V B | Kuldeep Singh Solanki | Aashutosh Raj Yadav "Seismic Performance of RC Frame Building with Different Position of Shear Wall" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, URL: https://www.ijtsrd.com/papers/ijtsrd31728.pdf Paper Url :https://www.ijtsrd.com/engineering/civil-engineering/31728/seismic-performance-of-rc-frame-building-with-different-position-of-shear-wall/bharath-v-b
Other Latest Articles
- The Concept of Duty in Kalidasa’s Works
- Using of Cloud Technologies in the Process of Preparing Future Specialists for Professional Activity
- Strum Liouville Problems in Eigenvalues and Eigenfunctions
- Performance Analysis of MIMO System on Different Modulation Scheme over Rician Channel
- Fuzzy Based Decision Making System for the Detection of Diabetic Retinopathy
Last modified: 2020-09-08 15:16:53