RFID Based Product Identification in a Closed Box

The main aim of this project is to manage inspection efficiently within the stipulated time line with at most accuracy The carton box containing the products with RFID tags is arranged accordingly. The efficient management system is developed to identify and sort out the quantity of products available in the box without unboxing. The box containing the product is placed in the conveyor once the box is placed a sensor senses the box and sends signal thereby switching ON the conveyor. The box then moves in the conveyor crosses the QR code scanner which reads the master data and sends it to the system the box then travels into the inspection chamber which has the two RFID reader antenna which emits signal and capture total number of RFID tags available in the box and similar tags hence sends the captured data to the system. If the total number of products, tags is matched with the master data the box moves to the selection section. In case if there is any mismatch found like different tags, product count with the master data the product is send for rejection during inspection of product if the product count is found to be less than the count mentioned in the master data a special operation is performed known as shake operation . Where the conveyor is moved back and forth continuously and again the product is inspected if it matches the master data it is sent for selection else the product is moved to rejection section by an arm. Dr. B. Sharmila | Dr. K. Srinivasan | T. Devendraprabhu "RFID Based Product Identification in a Closed Box" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, URL: https://www.ijtsrd.com/papers/ijtsrd31800.pdf Paper Url :https://www.ijtsrd.com/engineering/industrial-engineering/31800/rfid-based-product-identification-in-a-closed-box/dr-b-sharmila