ENGINEERING DESIGN OF A MANIPULATOR FOR MOUNTING AN AIR SUSPENSION COMPRESSOR TO A CAR CHASSIS
Journal: Scientific Journal of Silesian University of Technology. Series Transport (Vol.109, No. 10)Publication Date: 2020-12-01
Authors : Miroslav BLATNICKÝ Ján DIŽO Dalibor BARTA Iwona RYBICKA;
Page : 5-16
Keywords : compressor; an air suspension system; a chassis; engineering design; manipulation;
Abstract
This article is aimed at the engineering design of a manipulator, which is pneumatically controlled. It will serve for mounting the compressor of an air suspension system to the chassis of a sport utility vehicle (SUV) produced in the Slovak Republic. The manipulator will be used on an assembly line, on which SUVs are assembled. The designed device belongs to a group of dedicated devices, which are not produced within a serial production, however, it is the only functional prototype. Together with the manipulator structure, a pneumatic part of the assembly line including individual components, schemes and the pneumatic system will be proposed. Within the project process, all necessary customer demands, technical and safety standards have to be met. Moreover, ergonomic requirements for handling the device and other acts on the workplace have to be considered.
Other Latest Articles
- Tiyeno [3,2-b]tiyofen Fragmentli Yeni Bir Molekülün Deneysel Çalışmaları ve DFT Hesaplamaları
- Zc(3900) Parçacığının Molekül Durumundaki Manyetik Momenti
- Tarımda Kullanılan Bazı Mikrobiyal Gübrelerin Eisenia Foetida Deri Dokusu Üzerinde Etkisinin Morfolojik Açıdan Değerlendirilmesi
- Ultrasonik Ortamda Biyokömür Kullanarak Sulu Çözeltiden 5-Florourasilin Giderilmesi: Yanıt Yüzey Modellemesi ve Optimizasyonu
- Yeni Heterosiklik Azo Bileşikler: Sentez, Karakterizasyon ve DFT Hesaplamaları
Last modified: 2020-12-07 19:04:47