THE CONCEPTUAL DESIGN FOR LIQUID EFFLUENT TREATMENT OF UO2 KERNEL FABRICATION
Journal: Urania Jurnal Ilmiah Daur Bahan Bakar Nuklir (Vol.26, No. 2)Publication Date: 2020-06-30
Authors : Erilia Yusnitha; Agoeng Kadarjono; Agus Sartono; Pertiwi Diah Winastri;
Page : 69-74
Keywords : liquid effluent; UO2 kernel; CHEMCAD; HTGR.;
Abstract
THE CONCEPTUAL DESIGN FOR LIQUID EFFLUENT TREATMENT OF UO2 KERNEL FABRICATION. The pebble fuel for HTGR is prepared through fabrication of UO2 kernel, coated particle and spherical element fuel. In the fabrication of UO2 kernel by external gelation method, a multicomponent of liquid effluent is generated. Therefore, the liquid effluent is required to be treated for safety reason before disposed to waste storage. In this paper, the conceptual design for the liquid effluent treatment of UO2 kernel fabrication is performed with the simulation process using CHEMCAD software. CHEMCAD is a software that can be utilized for chemical process design. The results showed that the proposed conceptual design is able to separate valuable components: isopropyl alcohol (IPA) and tetrahydrofurfuryl alcohol (THFA). The flowrate of IPA product is
5.28 kg/h with purity of 0.99 in mass fraction and the flowrate of THFA product is 1.01 kg/h with purity of 0.99 in mass fraction.
Other Latest Articles
- PENGARUH ROL DINGIN DAN ANIL TERHADAP KARAKTERISTIK STRUKTUR MIKRO DAN KEKERASAN MIKRO PADUAN Zr-0,5%Nb-Si
- UJI TAK MERUSAK SHORT PIN PWR – FUEL DUMMY PASCA IRADIASI
- PENENTUAN BERAT ISOTOP CESIUM DAN URANIUM DALAM PELAT ELEMEN BAKAR U3Si2/Al DENSITAS 4,8 gU/cm3
- PERHITUNGAN BURN UP PEB U3Si2/Al DENSITAS 4,8 gU/cm3 PASCA IRADIASI POTONGAN BAGIAN MIDDLE
- PENENTUAN UMUR YELLOW CAKE SECARA RADIOKRONOMETRI
Last modified: 2021-01-01 16:41:43