Power Generation Development based on Solar Potential at Urban and Rural Regions Selected Locations in Pakistan
Journal: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) (Vol.10, No. 3)Publication Date: 2020-06-30
Authors : Muhammad Abid Khan Nuri Kayansayan; Abdelrahman Saber Nasser Mohanmed Ragab;
Page : 2601-2618
Keywords : Grid-Connected; Performance Parameters; PV Power Plant; Simulation Software’s & Tracking System;
Abstract
In Pakistan has chosen seven areas to investigate the feasibility of developing a photovoltage plant system sources has become a major purpose in this research. The technical feasibility research of photovoltaic systems based on crystalline technology proposed with varying monitoring systems in terms of fixed, 1 axis, inclined axis, and two axes was analyzed utilizing PVGIS and the PV Watts software. The simulations comes about appeared that the performance of the 2-axis is superior in contrast to another tracking system. On the basis of standard parameters, the environmental and economic viewpoints of the proposed plant are analyzed. The technical performances acquired by means of PVGIS have been high performances compared to the results of PV Watts. During this research, different performance parameters were calculated, such as the annual production of photovoltaic energy, the annual radiation in plane, the photovoltaic capacity, the performance factor, the capacity factor. In additions, the Levelized cost of energy (LCOE) for the fixed inclination, 1-axis, inclined axis and 2-axes for the plants. PV plants for all areas were gotten within the extend of $0.178-$ 0.239 / kWh, $0.14 - $ 0.202 / kWh, $0.145 - $0.203 / kWh and, $0.133 - $ 0.191 / kWh, separately.
Other Latest Articles
- Experimental Approach to Optimize the Fiber Volume Fraction and Orientation for Reinforced Banana Composites
- Grinding, Sieve Shacking and Evolving a Material From Shells of Crabs used for Light Weight Bio Medical Applications
- Optimization of Material Removal Rate in EDM Of D2 Steel by Taguchi Method
- Investigation of Natural Frequencies of Composite Shaft using FFT and Numerical Method
- Finite Element Analysis of Banana Fiber Reinforced Composites for Tensile Properties
Last modified: 2021-01-07 15:21:34