Effect of the Normal Load on the Friction and Wear Behaviour of Nickel-based Alloys Ni-Cr-B-Si-C-W
Journal: Tribology in Industry (Vol.42, No. 4)Publication Date: 2020-12-15
Authors : C. Benouali M.N. Bachir bey T. Sayah;
Page : 547-555
Keywords : Friction; Wear; Normal Load; Nickel; Alloys; Tribometer;
Abstract
The purpose of this paper is to compare the influence of the normal load on the friction and wear behaviour of nickel-based alloys, which is use communally in the industry. We chose two samples of nickel-based alloys (NI-Cr-B-Si-C-W) elaborated by isostatic compression with a difference in their microstructure composition and quantity of micro constituent. The friction coefficient, the wear loss and the wear rate are evaluated using a tribometer (pin on disc) and a test bench created to reproduce the same industrial environment. Experiments showed that the applied normal load affects differently on the behaviour of the samples. The results conclude that the friction and wear resistance of the alloy do not just depend on the increase of the normal load but also on the distribution, the location and the morphology of the hard compounds formed in the alloys.
Other Latest Articles
- Friction and Wear Properties of Rapid Solidified H-Al-17Si Alloys Processed by UV Assisted Stir - Squeeze Casting with DLC-Star (CrN + a-c:H) Coating Under HFRR
- The zoobenthos of the river Tzraudon, the Terek river basin
- Water quality assessment of La Tembladera wetland in Ecuador using Water Quality Index
- Use of activated peat for remediation of soils contaminated with petroleum products
- Anthropogenic impact on the Himalayan marmot population in Nepal
Last modified: 2021-02-10 20:42:56