Optimization of Machining Parameters on Electric Discharge Machining (EDM) of Maraging Steels C300
Journal: International Journal of Science and Research (IJSR) (Vol.8, No. 10)Publication Date: 2019-10-05
Authors : Pottakarla Mahesh; Akkala Yakanna;
Page : 521-526
Keywords : spark; dielectric; maraging steels; EDM; Graphite; Taguchi analysis;
Abstract
Electric discharge machining is categorized under thermoelectric process in which heat energy of spark is used to remove the material from work piece. This process involves controlled deterioration of electrically conducting material by the initiation of rapid and repetitive electrical spark discharges among tool and work piece, which are divided by dielectric. The present thesis aimed that is to characterizing the electric discharge machining parameters of maraging steels 300 on EDM by using Graphite as a electrode. Total 9 experiments are performed according to L9 orthogonal array and optimized values are obtained from Taguchi analysis. The Machining is executed by varying EDM process parameters such as pulse off time, current and pulse on time. The outputs are measured like material removal rate and surface finish are assessed. It is found that metal removal rate and surface roughness are increasing with increasing current and pulse on time.
Other Latest Articles
- Lotus Sutra: Analyze and Practise in Life
- An Overview of Fiber Reinforced Concrete, FRC and Fibers Properties and Current Applications
- q-Continuity Equation
- Comparison of Loss of Heterozygosity as a Marker of Various Histological Grades of Squamous Cell Cancer
- Diagnosis and Insulinoma Management Approach
Last modified: 2021-06-28 18:29:11