Microwave Drilling with Litz Wire using a Domestic Applicator
Journal: Bonfring International Journal of Industrial Engineering and Management Science (Vol.4, No. 3)Publication Date: 2014-08-30
Authors : Nitin K. Lautre; Apurbba K. Sharma; Pradeep Kumar; Shantanu Das;
Page : 125-131
Keywords : Applicator; COMSOL; Drilling; Litz; Microwave; Perspex;
Abstract
The work presented in the paper shows a way to drill a blind hole on perspex material at 2.45 GHz frequency of microwaves using a domestic applicator of 700 W maximum powers. The approach was based on the approach was based on the application of a Litz wire coax as a monopole, to act like a drill bit with a heat source. The methodology involves no rotary but, single linear movement of tool inside a microwave applicator for drilling. A computer simulation on COMSOL for about 50 minute each run, was also used to show the heat distribution inside microwave applicator. The result of computer simulation helped to locate the optimized position of Litz wire inside the applicator for optimum heat generation. The experimental results show the feasibility of microwave drilling and limitations on perspex specimen in the used applicator. The work presented involves a new approach in the area of microwave drilling of materials on a customized domestic microwave setup
Other Latest Articles
- Improvement in Wear Properties of a Hypereutectic Aluminium Silicon Alloy with Manganese
- A Computational Fluid Dynamics Investigation of Solar Air Heater Duct Provided with Inclined Circular Ribs as Artificial Roughness
- Comparative Study of Electrode Wear Estimation in Wire EDM using Multiple Regression Analysis and Group Method Data Handling Technique for EN-8 and EN-19
- Multi-Response Optimization of Manual Material Handling Tasks through Utility Concept
- Influence of Welding Processes on Tensile Properties, Microstructure, and Hardness of Friction Stir Welded AZ31B Magnesium Alloy
Last modified: 2015-01-07 15:22:21