Improvement of mechanical processing equipment due to synthesis of initial circuits of outpole gears
Journal: Nauchno-tekhnicheskiy vestnik Bryanskogo gosudarstvennogo universiteta (Vol.7, No. 2)Publication Date: 2021-06-25
Authors : Ryabichev V.D. Muhovatiy A.A.;
Page : 160-165
Keywords : gear transmission; initial contour; strength; out-of-pole engagement.;
Abstract
The synthesis of the initial contours of the teeth of out-of-pole gears on parallel axes according to the criterion of the contact strength of the working surfaces is presented, the geometric parameters of the original contours of the gear teeth with high contact strength of the working surfaces are determined. An assessment was carried out according to the following performance criteria: power loss in the engagement, the thickness of the oil layer, the specific work of friction forces, galling. transmission.
Other Latest Articles
- Dynamic load simulation of the machine nodes containing interacting rollers
- Providing the vertical dimension of a self-propelled machine with a rod mechanism for install-ing and fixing the end tower for a mobile ropeway
- Application of the parallelogram mechanism with the effect of quasi-zero stiffness in the vibration protection systems of the operator’s chair of a road construction machine
- Estimation of the efficiency of determining the performance of road machines by experimental and design ways
- Influence of hydro-pneumatic accumulator on the hydraulic drive of the brush work body of light type track machines
Last modified: 2021-07-13 16:17:36