A Review on Study of Heat Transfer Analysis of Helical Coil Heat Exchangers

Now a day's a geometrically modified Helical coil heat exchangers are widely using in industrial applications like cryogenic state processes, air conditioning, thermal nuclear reactors and waste heat recovery due to their compact size and high heat transfer coefficient. Advantage of using helical coils over straight tubes is that the residence time spread is reduced, allowing helical coils to be used to reduce axial dispersion in tubular reactors. In this study, numerical investigation of the influence of geometrical parameters such as tube diameter d , coil radius R , and coil pitch p on overall heat transfer coefficient in helical double tube heat exchangers are performed using a professional CFD software FLUENT. In recent years, numerous styles were introduced for heat exchangers that apply to completely different applications sadly, their heat transfer co efficient wasnt reliable at different operational conditions. the standard of the heat changed rate wasnt optimized and there have been many deficiencies and errors in styles. The heat transfer of the copper material is enhanced in comparison with other material unfortunately thermal resistance is reduced with an increase in pressure drop thus enhancing the heat transfer on the heat exchanger. Helical architecture is often designed with a clear motive of compact size and also address heat transfer co efficient and other ancillary attributes efficiently and effectively. So the better material is suggested for an industrial heat exchanger according to the applications is Copper with the basis of simulation results. The geometry and different dimension parameter of the helical coil show that the proposed study in different material properties and different mass flow rates to heat transfer are maximum in different parameter helical coil heat exchangers. Finally, the heat transfer increase for the copper material compared to another material but with the increase in pressure drop the corresponding thermal resistance decreases which allow the improved heat transfer rate and the rate increases from Aluminum to Bronze to Copper. With the drop in temperature, the thermal resistance is reduced which enhances the heat transfer rate. The simulation results show that the copper has a high heat transfer coefficient than Aluminum and Bronze while operating in identical conditions. Due to the extensive use of helical coils in various applications, knowledge about the flow patterns and heat transfer characteristics are important. Atul Vats | Sunil Kumar Chaturvedi | Abhishek Bhandari "A Review on Study of Heat Transfer Analysis of Helical Coil Heat Exchangers" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021, URL: https://www.ijtsrd.compapers/ijtsrd43650.pdf Paper URL: https://www.ijtsrd.comengineering/mechanical-engineering/43650/a-review-on-study-of-heat-transfer-analysis-of-helical-coil-heat-exchangers/atul-vats