THE PROTOTYPE OF SECONDARY DEVICE LEVEL METER OF CRYOGENIC LIQUIDS USED BY METAL OXIDE HIGH-TEMPERATURE SUPERCONDUCTORS
Journal: REFRIGERATION ENGINEERING AND TECHNOLOGY (Vol.51, No. 1)Publication Date: 2015-02-21
Authors : Yu. M. Symonenko; V. Yu. Emelianov;
Page : 61-68
Keywords : high-temperature superconductor; measuring the level of cryogen-liquids; thermoresistive level meter; the secondary device-level meter; level sensor HTS; Dewar flask; liquid nitrogen.;
Abstract
The aim was to create a cryogenic liquid the level gauge using thermoresistive effect in composite high-temperature superconductors (HTSC). The use of thin HTS provides reduced heat leakage to the small cryoagent, makes potentially possible obtaining of good inertia, metrological and economic (payment for a single measurement) parameters. The paper discusses the results of heat transfer HTS conductor with liquid nitrogen simulation, experimental performances of HTS conductors are presented. In conclusion secondary device-level meter of liquid nitrogen was designed and developed. Its testing on the laboratory Dewar flask with liquid nitrogen was carried out.
Other Latest Articles
- DETERMINATION OF HEAT TRANSFER COEFFICIENTS OF BOILING REFRIGERANTS PERTINENT TO THE COLD ACCUMULATORS’ CONDITIONS
- ABOUT CORRELATION BETWEEN THE PERCOLATION RATE OF MOISTURE THROUGH THE SEMI-PERMEABLE MEMBRANES AND THE STANDARD MEASUREMENTS OF THEIR PERMEABILITY OR EVAPORATIVE RESISTANCE
- ENGINEERING DEVELOPMENT OF MULTIFUNCTIONAL SOLAR SYSTEMS BASED ON THE HEAT-ABSORPTION CYCLE AND HEAT AND MASS TRANSFER DEVICES WITH A MOBILE NOZZLE
- STAGE COOLING OF INTAKE AIR FOR INTEGRATED ELECTRICAL STATION ENGINE ROOM
- THERMAL EFFICIENCY ANALYSIS OF CROSS-FINNED TUBES
Last modified: 2015-02-10 01:48:17