A COMPREHENSIVE REVIEW ON EVALUATION OF ENVIRONMENTAL FRIENDLY MACHINABILITY, CUTTING FLUIDS AND TECHNIQUES IN METAL CUTTING OPERATION

Todays, due to the environmental concerns, growing contamination and pollution regulations, the demand for renewable and biodegradable cutting fluids is increasing day by day. Environmental friendly machining is one of the latest approach which is economical and also eco-friendly that improve the machinability. Different types of environmental friendly machining techniques are available e.g. MQL machining, cryogenic machining, dry machining and high pressure cooling approach. In this article, an attempt is made regarding environmental friendly machining processing, including different types of cutting fluids and machining techniques. The Knowledge of cutting fluid and its processing conditions is of critically importance to maximize the efficiency of cutting fluids in any machining process. In general, the generation of heat in the cutting zone due to friction at the tool-chip interface and the friction between the safety surface of the tool and the work piece is always the deciding factor on the quality of the work piece surface. In any manufacturing industries or company two factors play important role in machinability and productivity e.g. surface quality and tool wear. The main objective of this review article that analysis the different environmental friendly machining techniques and encourages the cooling approach in metal cutting operation. So finally, after the literature survey found that environmental friendly machining approach is cost effective machining process and also eco-friendly machining process.