Evaluation of Different Paving Mixes Using Optimum Stabilizing Content

Bituminous mixes are most commonly used all over the world in flexible pavement construction. It consists of asphalt or bitumen used as a binder and mineral aggregate which are mixed together, laid down in layers and then compacted. Under normal circumstances, conventional bituminous pavements if designed and executed properly perform quite satisfactorily but the performance of bituminous mixes is very poor under various situations. Today's asphaltic concrete pavements are expected to perform better as they are experiencing increased volume of traffic, increased loads and increased variations in daily or seasonal temperature over what has been experienced in the past. In addition, the performance of bituminous pavements is found to be very poor in moisture induced situations. Considering this a lot of work has been done on use of additives in bituminous mixtures and as well as on modification of bitumen. Research has indicated that the addition of polymers to asphalt binders helps to increase the interfacial cohesiveness of the bond between the aggregate and the binder which can enhance many properties of the asphalt pavements to help meet these increased demands. However, the additive that is to be used for modification of mix or binder should satisfy both the strength requirements as well as economical aspects. Naveen Kumar | Ms. Shivani "Evaluation of Different Paving Mixes Using Optimum Stabilizing Content" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45089.pdf Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/45089/evaluation-of-different-paving-mixes-using-optimum-stabilizing-content/naveen-kumar