Field modeling of the fire dynamics as an answer to the question about the fire alarm performance

Introduction. The performance of a fire alarm needs to be analyzed to answer the question about its compliance with fire safety requirements. This type of research is frequently performed in the course of a forensic fire investigation. Therefore, it is necessary to identify conditions of fire escalation and safe evacuation of people to assess the fire alarm performance. Purposes and objectives. The purpose of this work is the numerical study of the impact, produced by mathematical models of combustion, characteristics of fire loads and locations of fire beds, on fire alarm performance. Methods. Fire dynamics was field modeled to achieve the goal of this research. The analysis of flame propagation was performed with regard for various fire bed locations to simulate the fire alarm operation. Results and discussion. The fulfillment of safe evacuation conditions for cases of irregular arrangement of smoke detectors was analyzed to develop and test the algorithm for the calculation of the evacuation start time. It is shown that the estimated time of fire detection depends on combustion models employed (their average or complex level), the size of the computational grid, fire load specifications and the location of the fire bed. Conclusions. It is shown that the results of the field modeling of fire propagation and detection time are influenced by combustion models used, fire load specifications and the location of the fire bed in relation to smoke detectors. If the fire alarm fails to perform its functions and, consequently, safe evacuation conditions are not fulfilled, it is necessary either to improve the combustion model or to compare the modeling results obtained for actual and standard smoke detector location patterns.