Sulfur dioxide in white sugar: Source of income, reference values

Sulfur dioxide is one of the classic essential technological processing aids used in modern technology for the production of white beet sugar. The technological and safe use of sulfites (sulfur dioxide, sodium sulfite and sodium hydrosulfite) in the formation of the food system of the sugar production process flow has been substantiated, and their functional effect is shown. It has been established that the change in the content of sulfur dioxide in white sugar under the influence of an antifoam, antiscale agent and decolorant in the doses used in massecuite occurred in accordance with the principle of additivity. The presence of the additive property was confirmed by the maximum approximation of the algebraic sum of the effects of each agent, amounting to 5.6%, to the range of variation in the values of the sulfur dioxide content (5.9) at a significance level of p=0.05. The dependence of the sulfur dioxide content in white sugar in a range of 0 to 6.5 mg/kg on the influence of the decolorant and defoamer in a dose range of 100 to 200 and of 4 to 6 g/t of massecuite was established. It has been revealed that increasing the minimum optimal dose of the decolorant to the maximum leads to an increase in the content of sulfur dioxide in white sugar by 1.7 times. Confidence intervals for the general mean were calculated based on the assumption of normal data distribution and a significance level of p=0.05. The reference values for the sulfur dioxide content in white sugar of the four categories were 1.28–2.69 mg/kg, and the upper limit level with consideration for the confidence interval was 1.39–3.01 mg/kg. The established reference values can be used at sugar factories in the production control system, and also provide an evidence base for comparison and assessment of this indicator of the white sugar safety for industrial consumers.