FEATURES OF THE FLOW IN MICRO-JET BURNERS WITH FUEL GAS SUPPLY FROM THE END OF THE FLAME STABILIZER
Journal: International Scientific Journal "Internauka" (Vol.1, No. 165)Publication Date: 2024-10-31
Authors : Fialko Nataliia; Prokopov Viktor; Sherenkovskiy Julii; Meranova Natalia; Aleshko Sergey; Olkhovska Nina; Polozenko Nina; Yurchuk Volodymyr; Chekharovska Marina;
Page : 83-88
Keywords : micro-jet burner; flow characteristics; flame stabilizer; circulation flow;
Abstract
The flow characteristics in micro-jet burners of the stabilizer type with end gas supply are considered. The influence of the ratio of gas velocities at the inlet to the gas-feeding holes and air at the outlet from the channel on the pattern of the circulation flow in the recirculation zone of the flame stabilizer is investigated. The features of vortex formation in the edge region of the stabilizer are analyzed for different values of the coefficient of blockage of the flow section of the channel under the considered conditions.
Other Latest Articles
- NEW HEAT-RECOVERY SYSTEMS WITH HEATING OF VARIOUS HEAT-TRANSFER AGENTS FOR BOILER PLANTS
- INCREASING THE ENVIRONMENTAL EFFICIENCY OF BOILER INSTALLATIONS WITH THE FLUE GAS HEAT-RECOVERY
- COMPARATIVE ANALYSIS OF MATHEMATICAL MODELS OF FLOW AND MIXING FORMATION AT MICRO-JET COMBUSTION OF FUEL
- INFLUENCE OF THE POWER OF MICRO-JET BURNERS ON THE CHARACTERISTICS OF FLOW AND MIXTURE FORMATION
- INCORPORATION OF PUMPKIN SEEDS IN THE TECHNOLOGY OF MINCED MEAT-BASED CULINARY PRODUCTS
Last modified: 2024-12-19 01:47:36